dmesg - 2 x Intel Xeon E5-2650 0 - Matrox s MGA G200eW
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.el6.x86_64 (mockbuild@c1bm.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Tue Mar 21 19:29:05 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000091800 (usable)
BIOS-e820: 0000000000091800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007df5d000 (usable)
BIOS-e820: 000000007df5d000 - 000000007e0c8000 (reserved)
BIOS-e820: 000000007e0c8000 - 000000007e2d8000 (ACPI NVS)
BIOS-e820: 000000007e2d8000 - 000000007f353000 (reserved)
BIOS-e820: 000000007f353000 - 000000007f800000 (ACPI NVS)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000002080000000 (usable)
SMBIOS version 2.7 @ 0xF04D0
SMBIOS 2.7 present.
DMI: Supermicro X9DRL-3F/iF/X9DRL-3F/iF, BIOS 3.0a 08/08/2013
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x2080000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 128GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 131072M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128G num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 2GB, range: 2GB, type UC
reg 2, base: 128GB, range: 2GB, type WB
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7df5d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007df5d000
0000000000 - 0040000000 page 1G
0040000000 - 007de00000 page 2M
007de00000 - 007df5d000 page 4k
kernel direct mapping tables up to 7df5d000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000002080000000
0100000000 - 2080000000 page 1G
kernel direct mapping tables up to 2080000000 @ 12000-13000
RAMDISK: 366d2000 - 37fef9ee
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f04a0 00024 (v02 ALASKA)
ACPI: XSDT 000000007e1f0090 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007e1fceb8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000007e1f01c0 0CCF8 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 000000007e2cf080 00040
ACPI: APIC 000000007e1fcfc8 00224 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000007e1fd1f0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000007e1fd238 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: SRAT 000000007e1fd278 004B0 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 000000007e1fd728 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 000000007e1fd758 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: PRAD 000000007e1fd790 000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SPMI 000000007e1fd850 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 000000007e1fd890 D0CB0 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 000000007e2ce540 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 000000007e2ce670 00230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 000000007e2ce8a0 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 000000007e2ce948 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 000000007e2ce978 00138 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 13 -> Node 0
SRAT: PXM 0 -> APIC 14 -> Node 0
SRAT: PXM 0 -> APIC 15 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-1080000000
SRAT: Node 1 PXM 1 1080000000-2080000000
NUMA: Allocated memnodemap from 12040 - 12100
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001080000000
NODE_DATA [0000000000012100 - 00000000000460ff]
bootmap [0000000000100000 - 000000000030ffff] pages 210
(9 early reservations) ==> bootmem [0000000000 - 1080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002045964] TEXT DATA BSS ==> [0001000000 - 0002045964]
#3 [00366d2000 - 0037fef9ee] RAMDISK ==> [00366d2000 - 0037fef9ee]
#4 [0000091800 - 0000100000] BIOS reserved ==> [0000091800 - 0000100000]
#5 [0002046000 - 00020464d8] BRK ==> [0002046000 - 00020464d8]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000012030] ACPI SLIT ==> [0000012000 - 0000012030]
#8 [0000012040 - 0000012100] MEMNODEMAP ==> [0000012040 - 0000012100]
Bootmem setup node 1 0000001080000000-0000002080000000
NODE_DATA [0000001080000040 - 000000108003403f]
bootmap [0000001080035000 - 0000001080234fff] pages 200
(9 early reservations) ==> bootmem [1080000000 - 2080000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002045964] TEXT DATA BSS
#3 [00366d2000 - 0037fef9ee] RAMDISK
#4 [0000091800 - 0000100000] BIOS reserved
#5 [0002046000 - 00020464d8] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000012030] ACPI SLIT
#8 [0000012040 - 0000012100] MEMNODEMAP
found SMP MP-table at [ffff8800000fdbf0] fdbf0
Found 137MB of memory at 48MB for crashkernel auto
Reserving 137MB of memory at 48MB for crashkernel (System RAM: 133120MB)
[ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
[ffffea000fc00000-ffffea0039bfffff] PMD -> [ffff880038000000-ffff880061ffffff] on node 0
[ffffea0039c00000-ffffea003fffffff] PMD -> [ffff881080400000-ffff8810867fffff] on node 1
[ffffea0040000000-ffffea0071bfffff] PMD -> [ffff881086a00000-ffff8810b85fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x02080000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x00000091
0: 0x00000100 -> 0x0007df5d
0: 0x00100000 -> 0x01080000
1: 0x01080000 -> 0x02080000
On node 0 totalpages: 16768734
DMA zone: 56 pages used for memmap
DMA zone: 115 pages reserved
DMA zone: 3798 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 497557 pages, LIFO batch:31
Normal zone: 222208 pages used for memmap
Normal zone: 16030720 pages, LIFO batch:31
On node 1 totalpages: 16777216
Normal zone: 229376 pages used for memmap
Normal zone: 16547840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 0000000000091000 - 0000000000092000
PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007df5d000 - 000000007e0c8000
PM: Registered nosave memory: 000000007e0c8000 - 000000007e2d8000
PM: Registered nosave memory: 000000007e2d8000 - 000000007f353000
PM: Registered nosave memory: 000000007f353000 - 000000007f800000
PM: Registered nosave memory: 000000007f800000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u131072
pcpu-alloc: s96600 r8192 d22184 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 16 17 18 19 20 21 22 23
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 24 25 26 27 28 29 30 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 33079915
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 132095168k/136314880k available (5467k kernel code, 2131080k absent, 2088632k reserved, 6954k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1480
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 45, tsc initial value = 9c50b2dbbe74
Fast TSC calibration using PIT
Detected 2000.170 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.34 BogoMIPS (lpj=2000170)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21966 entries in 87 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffe000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: DRHD base: 0x000000dfffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x0000007f223000 end: 0x0000007f231fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffe000 proximity domain: 0x1
dmar: RHSA base: 0x000000dfffc000 proximity domain: 0x0
IOAPIC id 3 under DRHD base 0xfbffe000
IOAPIC id 0 under DRHD base 0xdfffc000
IOAPIC id 2 under DRHD base 0xdfffc000
HPET id 0 under DRHD base 0xdfffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
APIC routing finalized to cluster x2apic.
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Booting Node 0, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok.
Booting Node 1, Processors #24 #25 #26 #27 #28 #29 #30 #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (127996.54 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7e0c8000 (2162688 bytes)
PM: Registering ACPI NVS region at 7f353000 (4902912 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
PMU erratum BJ122, BV98, HSD29 worked around, HT is on
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
_OSC request data:1 1f
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load - [PRAD] OemId [PRADID] OemTableId [PRADTID]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed0e000-0xfed0ffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xdff1c000-0xdff1ffff 64bit]
pci 0000:00:04.1: reg 10: [mem 0xdff18000-0xdff1bfff 64bit]
pci 0000:00:04.2: reg 10: [mem 0xdff14000-0xdff17fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0xdff10000-0xdff13fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0xdff0c000-0xdff0ffff 64bit]
pci 0000:00:04.5: reg 10: [mem 0xdff08000-0xdff0bfff 64bit]
pci 0000:00:04.6: reg 10: [mem 0xdff04000-0xdff07fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0xdff00000-0xdff03fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xdff28000-0xdff28fff]
pci 0000:00:16.0: reg 10: [mem 0xdff27000-0xdff2700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xdff26000-0xdff2600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xdff24000-0xdff243ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xdff23000-0xdff233ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x9070-0x9077]
pci 0000:00:1f.2: reg 14: [io 0x9060-0x9063]
pci 0000:00:1f.2: reg 18: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 1c: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 20: [io 0x9020-0x903f]
pci 0000:00:1f.2: reg 24: [mem 0xdff22000-0xdff227ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xdff21000-0xdff210ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x9000-0x901f]
pci 0000:00:1f.6: reg 10: [mem 0xdff20000-0xdff20fff 64bit]
pci 0000:01:00.0: reg 10: [mem 0xdfc00000-0xdfc03fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref]
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0x8000-0x8fff]
pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:01:00.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xde8f8000-0xde8fffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xde000000-0xde7fffff 64bit pref]
pci 0000:03:00.0: reg 20: [io 0x8100-0x81ff]
pci 0000:03:00.0: reg 24: [io 0x8000-0x80ff]
pci 0000:03:00.0: reg 164: [mem 0xde800000-0xde807fff 64bit pref]
pci 0000:03:00.3: reg 10: [mem 0xdfb01000-0xdfb01fff]
pci 0000:03:00.3: reg 20: [io 0x8220-0x823f]
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: PME# disabled
pci 0000:03:00.4: reg 10: [mem 0xdfb00000-0xdfb00fff]
pci 0000:03:00.4: reg 20: [io 0x8200-0x821f]
pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
pci 0000:03:00.4: PME# disabled
pci 0000:02:08.0: PCI bridge to [bus 03-03]
pci 0000:02:08.0: bridge window [io 0x8000-0x8fff]
pci 0000:02:08.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:02:08.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [mem 0xdf900000-0xdf9fffff 64bit]
pci 0000:05:00.0: reg 18: [mem 0xdfa41000-0xdfa417ff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xdfa40000-0xdfa400ff]
pci 0000:05:00.0: reg 30: [mem 0xdfa00000-0xdfa3ffff pref]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0
pci 0000:05:00.0: PME# disabled
pci 0000:00:02.2: PCI bridge to [bus 05-05]
pci 0000:00:02.2: bridge window [mem 0xdf900000-0xdfafffff]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:08:00.0: reg 10: [mem 0xdfe00000-0xdfe1ffff]
pci 0000:08:00.0: reg 18: [io 0x7000-0x701f]
pci 0000:08:00.0: reg 1c: [mem 0xdfe20000-0xdfe23fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 08-08]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:09:00.0: reg 10: [mem 0xdfd00000-0xdfd1ffff]
pci 0000:09:00.0: reg 18: [io 0x6000-0x601f]
pci 0000:09:00.0: reg 1c: [mem 0xdfd20000-0xdfd23fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.5: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:0a:01.0: reg 10: [mem 0xdd000000-0xddffffff pref]
pci 0000:0a:01.0: reg 14: [mem 0xdf800000-0xdf803fff]
pci 0000:0a:01.0: reg 18: [mem 0xdf000000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1.BR1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1.BR1B.BR1C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: on NUMA node 0
pci0000:7f: Requesting ACPI _OSC control (0x1d)
pci0000:7f: ACPI _OSC control (0x1d) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
pci_root PNP0A08:01: host bridge window [io 0xa000-0xffff]
pci_root PNP0A08:01: host bridge window [mem 0xe0000000-0xfbffffff]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0xa000-0xffff]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff]
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:04.0: reg 10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: reg 10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: reg 10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: reg 10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: reg 10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: reg 10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: reg 10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.4: reg 10: [mem 0xfbf20000-0xfbf20fff]
pci 0000:80:01.0: PCI bridge to [bus 81-81]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
pci0000:80: Requesting ACPI _OSC control (0x1d)
pci0000:80: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: on NUMA node 1
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:0a:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0a:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 74 for MSI
hpet: hpet3 irq 75 for MSI
hpet: hpet4 irq 76 for MSI
hpet: hpet5 irq 77 for MSI
hpet: hpet6 irq 78 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xdfffc000-0xdfffdfff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0a00-0x0a7f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x03f8-0x03ff]
pnp 00:04: [irq 4]
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [io 0x02f8-0x02ff]
pnp 00:05: [irq 3]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 4]
pnp 00:06: [io 0x0000-0x000f]
pnp 00:06: [io 0x0081-0x0083]
pnp 00:06: [io 0x0087]
pnp 00:06: [io 0x0089-0x008b]
pnp 00:06: [io 0x008f]
pnp 00:06: [io 0x00c0-0x00df]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0061]
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x0ca2]
pnp 00:0b: [io 0x0ca3]
pnp 00:0b: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0c: [io 0x0400-0x0453]
pnp 00:0c: [io 0x0458-0x047f]
pnp 00:0c: [io 0x1180-0x119f]
pnp 00:0c: [io 0x0500-0x057f]
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfec00000-0xfecfffff]
pnp 00:0c: [mem 0xfed08000-0xfed08fff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [io 0x0454-0x0457]
pnp 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0e: [mem 0xfed00000-0xfed003ff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:12: [mem 0xfbffe000-0xfbffffff]
pnp 00:12: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:13: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 20 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:02: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:03: [io 0x0a00-0x0a7f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0c: [io 0x0400-0x0453] has been reserved
system 00:0c: [io 0x0458-0x047f] has been reserved
system 00:0c: [io 0x1180-0x119f] has been reserved
system 00:0c: [io 0x0500-0x057f] has been reserved
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [io 0x0454-0x0457] has been reserved
system 00:12: [mem 0xfbffe000-0xfbffffff] could not be reserved
pci 0000:02:08.0: PCI bridge to [bus 03-03]
pci 0000:02:08.0: bridge window [io 0x8000-0x8fff]
pci 0000:02:08.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:02:08.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0x8000-0x8fff]
pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:01:00.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xde8fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.2: PCI bridge to [bus 05-05]
pci 0000:00:02.2: bridge window [mem 0xdf900000-0xdfafffff]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.4: PCI bridge to [bus 08-08]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.5: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:80:01.0: PCI bridge to [bus 81-81]
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:08.0: setting latency timer to 64
alloc irq_desc for 33 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 41 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 51 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:01.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
pci 0000:80:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
pci_bus 0000:01: resource 2 [mem 0xde000000-0xde8fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:02: resource 2 [mem 0xde000000-0xde8fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:03: resource 2 [mem 0xde000000-0xde8fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdfafffff]
pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:0a: resource 1 [mem 0xdf000000-0xdf8fffff]
pci_bus 0000:0a: resource 2 [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0a: resource 7 [io 0x0d00-0x9fff]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xfed0e000-0xfed0ffff]
pci_bus 0000:0a: resource 11 [mem 0x80000000-0xdfffffff]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:0a:01.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25718k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1527819075.393:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 1A01485A64DD991D
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 79 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 80 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 81 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 82 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 83 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.4: irq 84 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.5: irq 85 for MSI/MSI-X
pcieport 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 86 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:01.0: irq 86 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdff24000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdff23000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2018-06-01 02:11:17 UTC (1527819077)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 656k freed
Freeing unused kernel memory: 1548k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
dracut: Starting plymouth daemon
usb 1-1: new high speed USB device number 2 using ehci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Adaptec aacraid driver 1.2-0[30300]-ms
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
aacraid 0000:05:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
aacraid 0000:05:00.0: setting latency timer to 64
resource map sanity check conflict: 0xdf900000 0xdfcfffff 0xdf900000 0xdfafffff PCI Bus 0000:05
caller aac_src_ioremap+0xb6/0x100 [aacraid] mapping multiple BARs
IRQ 34/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
AAC0: kernel 5.3-0[19204] Apr 7 2017
AAC0: monitor 5.3-0[19204]
AAC0: bios 5.3-0[19204]
AAC0: serial 6C406388404
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi0 : aacraid
scsi 0:0:0:0: Direct-Access Adaptec DISK_RAID0 V1.0 PQ: 0 ANSI: 2
scsi 0:1:4:0: Direct-Access ATA ST1000LM014-1EJ1 SM28 PQ: 1 ANSI: 5
scsi 0:1:5:0: Direct-Access ATA ST1000LM014-1EJ1 SM28 PQ: 1 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
scsi 0:1:6:0: Direct-Access ATA ST1000LM014-1EJ1 SM28 PQ: 1 ANSI: 5
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
scsi 0:1:7:0: Direct-Access ATA ST1000LM014-1EJ1 SM28 PQ: 1 ANSI: 5
Refined TSC clocksource calibration: 1999.999 MHz.
Switching to clocksource tsc
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 87 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 87 for MSI/MSI-X
usb 2-1: new high speed USB device number 2 using ehci_hcd
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdff22000 port 0xdff22100 irq 87
ata2: SATA max UDMA/133 abar m2048@0xdff22000 port 0xdff22180 irq 87
ata3: SATA max UDMA/133 abar m2048@0xdff22000 port 0xdff22200 irq 87
ata4: SATA max UDMA/133 abar m2048@0xdff22000 port 0xdff22280 irq 87
ata5: SATA max UDMA/133 abar m2048@0xdff22000 port 0xdff22300 irq 87
ata6: SATA max UDMA/133 abar m2048@0xdff22000 port 0xdff22380 irq 87
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full speed USB device number 3 using ehci_hcd
usb 1-1.3: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Hermon USB hidmouse Device
usb 1-1.3: Manufacturer: Winbond Electronics Corp
usb 1-1.3: configuration #1 chosen from 1 choice
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input4
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input1
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 4B0Q PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1.7: new high speed USB device number 3 using ehci_hcd
usb 2-1.7: New USB device found, idVendor=1c6b, idProduct=a220
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.7: Product: Mass Storage Device
usb 2-1.7: Manufacturer: USB2.0 External
usb 2-1.7: SerialNumber: 0010101640802E9B0
usb 2-1.7: configuration #1 chosen from 1 choice
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0-rh
isci 0000:03:00.0: driver configured for rev: 6 silicon
isci 0000:03:00.0: OEM parameter table found in OROM
isci 0000:03:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
isci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
isci 0000:03:00.0: setting latency timer to 64
isci 0000:03:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi7 : isci
isci 0000:03:00.0: SCU controller 1: phy 3-0 cables: {short, short, short, short}
scsi8 : isci
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:03:00.0: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:03:00.0: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:03:00.0: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:03:00.0: irq 91 for MSI/MSI-X
usb 2-1.8: new low speed USB device number 4 using ehci_hcd
usb 2-1.8: New USB device found, idVendor=046d, idProduct=0100
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: G100 Gaming Keyboard
usb 2-1.8: Manufacturer: Logitech
usb 2-1.8: configuration #1 chosen from 1 choice
input: Logitech G100 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input5
generic-usb 0003:046D:0100.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech G100 Gaming Keyboard] on usb-0000:00:1d.0-1.8/input0
input: Logitech G100 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input6
generic-usb 0003:046D:0100.0004: input,hidraw3: USB HID v1.11 Device [Logitech G100 Gaming Keyboard] on usb-0000:00:1d.0-1.8/input1
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:0:0: [sda] 7809773568 512-byte logical blocks: (3.99 TB/3.63 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb:
sd 1:0:0:0: [sdb] Attached SCSI disk
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:0:0: [sda] Attached SCSI removable disk
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda4
usb-storage: device scan complete
scsi 9:0:0:0: CD-ROM hp DVD DE8A3L WH6E PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 24x/188x writer dvd-ram cd/rw xa/form2 cdda pop-up
Uniform CD-ROM driver Revision: 3.20
sr 9:0:0:0: Attached scsi CD-ROM sr0
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1527819080.198:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:1:4:0: Attached scsi generic sg1 type 0
scsi 0:1:5:0: Attached scsi generic sg2 type 0
scsi 0:1:6:0: Attached scsi generic sg3 type 0
scsi 0:1:7:0: Attached scsi generic sg4 type 0
sd 1:0:0:0: Attached scsi generic sg5 type 0
sr 9:0:0:0: Attached scsi generic sg6 type 5
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
alloc irq_desc for 31 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: irq 92 for MSI/MSI-X
alloc irq_desc for 39 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.1: setting latency timer to 64
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: irq 93 for MSI/MSI-X
ioatdma 0000:00:04.2: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.2: setting latency timer to 64
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.2: irq 94 for MSI/MSI-X
ioatdma 0000:00:04.3: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.3: setting latency timer to 64
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.3: irq 95 for MSI/MSI-X
ioatdma 0000:00:04.4: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.4: setting latency timer to 64
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.4: irq 96 for MSI/MSI-X
ioatdma 0000:00:04.5: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.5: setting latency timer to 64
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.5: irq 97 for MSI/MSI-X
ioatdma 0000:00:04.6: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.6: setting latency timer to 64
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.6: irq 98 for MSI/MSI-X
ioatdma 0000:00:04.7: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.7: setting latency timer to 64
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.7: irq 99 for MSI/MSI-X
alloc irq_desc for 55 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.0: PCI INT A -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.0: setting latency timer to 64
alloc irq_desc for 100 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.0: irq 100 for MSI/MSI-X
alloc irq_desc for 63 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.1: PCI INT B -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.1: setting latency timer to 64
alloc irq_desc for 101 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.1: irq 101 for MSI/MSI-X
ioatdma 0000:80:04.2: PCI INT C -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.2: setting latency timer to 64
alloc irq_desc for 102 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.2: irq 102 for MSI/MSI-X
ioatdma 0000:80:04.3: PCI INT D -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.3: setting latency timer to 64
alloc irq_desc for 103 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.3: irq 103 for MSI/MSI-X
ioatdma 0000:80:04.4: PCI INT A -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.4: setting latency timer to 64
alloc irq_desc for 104 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.4: irq 104 for MSI/MSI-X
ioatdma 0000:80:04.5: PCI INT B -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.5: setting latency timer to 64
alloc irq_desc for 105 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.5: irq 105 for MSI/MSI-X
ioatdma 0000:80:04.6: PCI INT C -> GSI 55 (level, low) -> IRQ 55
ioatdma 0000:80:04.6: setting latency timer to 64
alloc irq_desc for 106 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.6: irq 106 for MSI/MSI-X
ioatdma 0000:80:04.7: PCI INT D -> GSI 63 (level, low) -> IRQ 63
ioatdma 0000:80:04.7: setting latency timer to 64
alloc irq_desc for 107 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
ioatdma 0000:80:04.7: irq 107 for MSI/MSI-X
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:08:00.0: setting latency timer to 64
e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
e1000e 0000:08:00.0: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
e1000e 0000:08:00.0: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
e1000e 0000:08:00.0: irq 110 for MSI/MSI-X
e1000e 0000:08:00.0: eth0: registered PHC clock
e1000e 0000:08:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0c:42:00
e1000e 0000:08:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:08:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:09:00.0: setting latency timer to 64
e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
e1000e 0000:09:00.0: irq 111 for MSI/MSI-X
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
e1000e 0000:09:00.0: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
e1000e 0000:09:00.0: irq 113 for MSI/MSI-X
e1000e 0000:09:00.0: eth1: registered PHC clock
e1000e 0000:09:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0c:42:01
e1000e 0000:09:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using polling
i801_smbus 0000:03:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:03:00.3: SMBus using polling
i801_smbus 0000:03:00.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:03:00.4: SMBus using polling
EDAC MC: Ver: 2.1.0 Mar 21 2017
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:7f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:ff:0e.0
EDAC sbridge: Ver: 1.1.1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU24 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU25 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU26 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU27 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU28 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU29 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU30 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU31 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0b: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: mem 0x0 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:0b: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si 00:0b: Found new BMC (man_id: 0x002a7c, prod_id: 0x0667, dev_id: 0x20)
ipmi_si 00:0b: IPMI kcs interface initialized
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (sda2): Mounting Filesystem
XFS (sda2): Ending clean mount
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1305 audit(1527819089.019:3): audit_pid=3193 old=0 auid=4294967295 ses=4294967295 res=1
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
eth0: no IPv6 routers present
This updated microcode supersedes microcode provided by Red Hat with
the CVE-2017-5715 (“Spectre”) CPU branch injection vulnerability
mitigation.
Historically, Red Hat has provided updated microcode, developed by our
microprocessor partners, as a customer convenience. Red Hat had
temporarily suspended this practice while microcode stabilized. Red
Hat is once again providing an updated Intel microcode package
(microcode_ctl) and AMD microcode package (linux-firmware) to customers
in order to simplify deployment processes and minimize downtime. We’ll
continue to update these microcode packages as necessary. Please
contact your hardware vendor to determine whether more recent
BIOS/firmware updates are recommended because additional improvements
may be available.
This kbase includes a table
that maps Intel and AMD CPU processor code family names to updated
Intel and AMD microcode package versions.